LIEBERT INTELLISLOT MULTIPORT

MULTIPLEXING DEVICE TO ENABLE UPS MONITORING AND SHUTDOWN COMMUNICATIONS

Liebert IntelliSlot Multiport relay contact multiplexing unit communicates the On Battery and Low Battery status of a single UPS to connected PC’s, servers, or workstations. Liebert IntelliSlot Multiport relay contact multiplexing device allows UPS monitoring for multiple computer systems running Liebert MultiLink or other shutdown software.

 

Features:

  • Relay multiplexing unit supports 5 computers
  • Offers hot-swappable user-installation in Intellislot communication port
  • Communicates with Liebert MultiLink automated shutdown software

 

Benefits:

Flexibility

  • Shutdown communications for up to five computers connected to a single UPS — a host computer connected to the factory-installed UPS communications port and up to four client computers connected via Liebert MultiPort.
  • Compatible with Liebert MultiLink shutdown software.

Higher Availability

  • When a utility power failure or low battery condition is detected, Liebert MultiPort provides a signal to each connected computer.

Lowest Total Cost Of Ownership

  • Easy user installation in the Intellislot communication port of select Liebert UPS systems.
  • Maximizes the effectiveness of a single UPS system.

Ideally Suited For

  • Liebert NX on-line UPS
  • Liebert Nfinity® on-line UPS
  • Liebert GXT on-line UPS
  • Liebert PSI line-interactive UPS

LIEBERT® INTELLISLOT UNITY COMMUNICATIONS INTERFACE CARD

Liebert IntelliSlot Unity Communications Interface Card​ provides Trellis™, LIFE™ Technology and Liebert Nform enablement as well as Web access and third-party customer protocols for Emerson Network Power equipment. The cards employ Ethernet and RS-485 networks to monitor and manage a wide range of operating parameters, alarms and notifications.

The Liebert IntelliSlot™ Unity communications platform is the next generation of communications interface enhancing the enablement of Emerson software tools and services, including Trellis™, Liebert Nform, and LIFE™ Technology, as well as third-party customer protocols for Emerson Network Power equipment. Unity cards deliver Web, LIFE Technology, Emerson Protocol, SNMP, BACnet IP/MSTP, Modbus TCP/RTU, YDN23, Email, Text Messaging, and Telnet communication and control capabilities for Liebert Power and Thermal Management equipment. The Unity cards will eventually replace many of the existing Web and 485 cards to simplify ordering, delivery, and configuration. The platform supports 10/100 Mbit Ethernet, IPv4 and IPv6, HTTP/HTTPS for device webpage access, Emerson Protocol for communicating with Trellis™ and Nform software applications, and LIFE™ Technology for supporting Remote Service Delivery applications. Third-party protocols (Modbus/IP, BACnet/IP, Modbus/485, and SNMP v1/v2c/v3)(Modbus TCP, BACnet IP, Modbus RTU, BACnet MSTP, SNMP v1/v2c/v3, and YDN23) are also supported for building management and network management applications.

There are two cards that make up the Unity communications platform, IS-UNITY-DP, and IS-UNITY-LIFE. Both cards provide web access to the device, support LIFE™ Technology for enabling remote service delivery, and Emerson Protocol for enabling Trellis and Nform management applications. In addition, the IS-UNITY-DP card supports third-party protocols. The IS-UNITY-LIFE card provides the Emerson protocol and LIFE™ Technology enablement without third-party protocol support. The IS-UNITY-LIFE card cannot be ordered. It is provided to customers free of charge as part of a Remote Service Delivery contract, to support an Emerson Management software application, or factory installed in products ordered without third-party protocol support to enable LIFE™ Technology support under the warranty period.

  • Liebert IntelliSlot Unity Communications Interface Card​s are compatible with Liebert APM™, Liebert APS™, Liebert NXC™, Liebert NXL™, Liebert NXR™, Liebert CRV™, Liebert CW™*, Liebert Challenger™*, Liebert Deluxe System/3™*, Liebert DCP™, , Liebert DS™*, Liebert DSE™ , Liebert HPC™, Liebert HPM™, Liebert PeX™*,Liebert PeX-S™, Liebert PDX/PCW™, Liebert XDC™ with iCOM Control, Liebert XDP™ with iCOM Control, Liebert XDP-Cray 

* iCOM Firmware PA1.04.033.STD versions or later

 

Features:

  • Provides Web access to the installed device via popular web browsers – Microsoft Internet Explorer®, Mozilla Firefox®, Google Chrome®, and Safari (MacBook and iPad)
  • Enables Emerson software tools and services, including Trellis™, Liebert Nform, and LIFE™ Technology
  • Connects to Ethernet and 485 networks
  • Supports 10/100 Mbit Ethernet, IPv4 and IPv6, and HTTP/HTTPS for device webpage access
  • Third-party protocols (Modbus TCP/RTU, BACnet IP/MSTP, SNMP v1/v2c/v3, and YDN23) are also supported for building management and network management applications
  • Provides alarm notifications via email and text messaging
  • Monitors equipment parameters for users and management applications

 

Benefits:

Flexibility

  • Allows systems to be viewed from the network using a web browser.
  • Connects to Ethernet or 485 Serial networks, or both
  • Compatible with 10/100 MBit Ethernet for legacy and modern networks
  • Supports a variety of Emerson software tools and services, including Trellis™, Liebert Nform, and LIFE™ Technology
  • Supports a variety of third-party protocols Modbus TCP, BACnet IP, Modbus RTU, BACnet MSTP, SNMP v1/v2c/v3 and YDN23 for building management and network management applications
  • Provides security using HTTPS message encryption

Higher Availability

  • Interfaces with Trellis™ for comprehensive data center infrastructure management
  • Provides compatibility with Liebert MultiLink shutdown software, to prevent data loss and ensure data availability
  • Supports Liebert SiteScan WEB enterprise monitoring software, to provide trending for proactive analysis and maintenance to ensure facility uptime
  • Interfaces to Liebert Nform alarm notification software, to facilitate quick corrective action. MTTR
  • LIFE™ technology support for sending a comprehensive data report to system engineers for quick diagnostics and dispatching of service — restoring normal unit operations and shortening

Lowest Total Cost Of Ownership

  • Combines functionality of the Web Card with the 485 Card into a single unified card
  • Connects to existing Ethernet or 485 networks, saving the cost of dedicated wiring
  • Requires no additional software installation for basic monitoring
  • Provides notifications in the absence of a comprehensive monitoring system
  • Provides a single point of information and control

Ideally Suited For

  • Small and large data centers
  • Computer rooms, network access spaces or server closets
  • Telecommunications facilities
  • Industrial process control centers
  • Other sensitive electronic applications

LIEBERT® INTELLISLOT WEB COMMUNICATIONS INTERFACE CARD

Liebert IntelliSlot Web Card family delivers SNMP, Telnet and web-management capability for enhanced communications and control of Liebert UPS, power management or precision cooling systems. Effective data center monitoring is provided by a wide range of operating parameters, alarms and notifications; transmitting data over the network.

Liebert IntelliSlot Web Card (formerly Liebert OpenComms Web Card and Liebert OpenComms NIC Card) delivers SNMP and Web management to a Liebert UPS, power management or precision cooling system connected to any 10- or 100-Mbit Ethernet network. The interface provides for remote web or in-the-field firmware upgrade. Alarms and parameters are transmitted over the network using SNMP, email, and SMS text. In addition, Liebert IntelliSlot Web Card w/Adapter supports Modbus.

  • Liebert IntelliSlot Web Card is compatible with the Liebert PowerSure PSI line-interactive UPS (product prior to July 2008) , Liebert GXT on-line UPS, Liebert GXT 6 & 10kVA on-line UPS,Liebert GXT3 on-line UPS, Liebert GXT4 on-line UPS, Liebert GXT 2U on-line UPS and Liebert Nfinity on-line UPS.
  • Liebert IntelliSlot IS-WEBRT3 Web Card is is compatible with Liebert PSI line-interactive UPS and Liebert PSI-XR line-interactive UPS
  • Liebert IntelliSlot Web Card LB is compatible with Liebert NX on-line UPS and Liebert Hinet on-line UPS.
  • Liebert IntelliSlot Web Card LBDS is compatible with Liebert DS and Liebert XDF precision cooling systems.
  • Liebert IntelliSlot Web/485 Card ADPT is compatible with Liebert power, UPS and precision cooling systems that are not equipped with an IntelliSlot port.
  • Liebert IntelliSlot 485 NXL card is compatible with Liebert NXL on-line UPS.
  • Liebert IntelliSlot Web Card L card is compatible with Liebert iCOM v.4 for all Liebert XDP iCOM, Liebert CRV and FW – PA1.04.033.STD or later for the Liebert DS, Liebert Challenger, and Liebert Deluxe.
  • Liebert IntelliSlot Web Card IPBML is compatible with Liebert iCOM v.4 for all Liebert XDP iCOM, Liebert CRV and FW – PA1.04.033.STD or later for the Liebert DS, Liebert Challenger, and Liebert Deluxe.
  • Liebert IntelliSlot Web Card S is compatible with Liebert PPC.
  • Liebert IntelliSlot Web Card IPBMS is compatible with Liebert PPC.

 

Features:

  • Web interface card with SNMP and Telnet capability
  • Provides alarm notifications via email and text messaging
  • Monitors UPS parameters via web browser
  • Operates compatibly with Liebert monitoring software

 

Benefits:

Flexibility

  • Allows systems to be viewed from the network using a web browser.
  • Delivers SNMP, Telnet and web management.
  • Provides security using HTTPS message encryption.
  • Supports 10- and 100-MBit Ethernet for legacy and modern networks.

Higher Availability

  • Provides compatibility with Liebert MultiLink shutdown software, to prevent data loss and ensure data availability.
  • Supports Liebert SiteScan WEB enterprise monitoring software, to provide trending for proactive analysis and maintenance to ensure facility uptime.
  • Interfaces to Liebert Nform alarm notification software, to facilitate quick corrective action.

Lowest Total Cost Of Ownership

  • Allows use of existing network, saving the cost of dedicated wiring.
  • Requires no additional software installation for basic monitoring.
  • Provides notification in the absence of a comprehensive monitoring system.
  • Provides a single point of information/control.

Ideally Suited For

  • Small and large data centers
  • Computer rooms, network access spaces or server closets
  • Telecommunications facilities
  • Industrial process control centers
  • Other sensitive electronic applications

LIEBERT® INTELLISLOT 485 INTERFACE CARD

MONITORING AND CONTROL OF YOUR LIEBERT EQUIPMENT THROUGH LIEBERT SITESCAN OR BMS

Liebert IntelliSlot 485 card family allows monitoring and control of your Liebert equipment through Liebert SiteScan Web or your existing Building Data Center Infrastructure Management System. The interface delivers Modbus or Liebert proprietary protocol via the EIA-485 port.

Liebert IntelliSlot 485 interface card (formerly Liebert OpenComms 485 and Liebert OpenComms NIC-485 cards) provides connection to Liebert SiteScan Web, for access to real-time control plus the tools to analyze important data about Liebert equipment. It allows the operator to access current data and interact with graphic programming logic in real-time, for full control functionality. During an alarm, the system can provide instant information and a view of UPS actual performance. Supports the open protocol standard of RTU Modbus.

  • Liebert IntelliSlot 485 card is compatible with Liebert PowerSure PSI line-interactive UPS, Liebert UPStation GXT on-line UPS, Liebert GXT 6 & 10kVA on-line UPS, Liebert GXT 2U on-line UPS, Liebert Nfinity on-line UPS, Liebert NX on-line UPS, and Hiross Hinet on-line UPS systems.
  • Liebert IntelliSlot 485 LBDS card is compatible Liebert DS and Liebert XDF precision cooling systems.
  • Liebert IntelliSlot 485 ADPT and Liebert IntelliSlot Web/485 ADPT cards are compatible with Liebert Power, UPS and Precision Cooling systems that are not equipped with an IntelliSlot port.
  • Liebert IntelliSlot Web Card NXL is compatible with Liebert NXL on-line UPS.

 

Features:

  • Liebert equipment interface card
  • Operates with industry standard “Open” protocol
  • Communicates with Liebert SiteScan Web software
  • Provides remote alarm notification

 

Benefits:

Flexibility

  • Offers multiple connection options: Liebert IntelliSlot 485 and Liebert IntelliSlot 485 LBDS support IGM and MODBUS; Liebert IntelliSlot 485 ADPT and Liebert IntelliSlot Web/485 ADPT support MODBUS (an added connection option for equipment using the Liebert proprietary protocol).
  • Provides for ease of integration with industry standard “open” protocol.

Higher Availability

  • Configures easily to work with Liebert SiteScan Web enterprise monitoring system and Building Management Systems.
  • Allows for proactive analysis and maintenance to ensure facility uptime, through use of parametric data.

Lowest Total Cost Of Ownership

  • Communicates to Liebert SiteScan Web or Building Management System with a single card, eliminating the need for additional hardware.
  • Provides data for analysis and planning to reduce or eliminate costly downtime.

Ideally Suited For

  • Small and large data centers
  • Computer rooms, network access spaces or server closets
  • Telecommunications facilities
  • Industrial process control centers
  • Other sensitive electronic applications

LIEBERT INTELLISLOT RELAY CARD

HOT-SWAPPABLE RELAY INTERFACE FOR UPS MONITORING

Liebert Intellislot Relay Card provides contact closures for remote monitoring of alarm conditions of Liebert UPS systems equipped with an Intellislot communication port. Proactive data center monitoring is provided by On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals to relay contact monitoring systems. The card is user-installable and hot-swappable.

Liebert Intellislot Relay Card supports UPS systems equipped with the Liebert Intellislot communication port. The card provides Form C contact closure output from the UPS for external systems to monitor On Battery, Low Battery, On Bypass (on-line UPS unit only), and On UPS (on-line UPS units only) alarm conditions. The card supports 24VAC/DC applications up to 1A.

 

Features:

  • Relay interface card for Liebert UPS
  • Allows hot-swappable user-installation in Intellislot communication port
  • Communicates with Liebert MultiLink automated shutdown software

 

Benefits:

Flexibility

  • Easy to integrate with other relay contact monitoring systems.

Higher Availability

  • The RS-232 port on the UPS remains active with the card installed, allowing more sophisticated monitoring with Liebert MultiLink software.
  • The inverter shut-off command can be controlled from the computer directly connected to the UPS (via the factory-installed DB9 connector) and will conserve battery power after workstation shutdown is completed.

Lowest Total Cost Of Ownership

  • The card is user-installable and hot-swappable, for faster installation by on-site personnel.

Ideally Suited For

  • Liebert NX on-line UPS
  • Liebert Nfinity on-line UPS
  • Liebert GXT on-line UPS

SURABAYA HEAD OFFICE

Komplek Surya Inti Permata I Blok B 8-9
Jl. HR. Muhammad Kav. 360-380
Surabaya 60226
Jawa Timur - Indonesia
+62-31-7342189
+62-31-7342188
info@dynamiperkasa.com

JAKARTA BRANCH OFFICE

Rukan Taman Surya 5
Ruko San Marino Palm Paradise
Blok A no. 19 Pegadungan - Jakarta Barat
DKI Jakarta - Indonesia

+62-21-2967.1014/24
+62-21-2967.1034

BALI BRANCH OFFICE

Komplek Sunset Indah II Blok B-3a Sunset Road, Kuta
Denpasar 80361 - Indonesia
+62-361-751691 (hunting)